PT 1.3.3.2 Packet Tracer- Static Routing

In this Packet Tracer i will be able to how routing tables can use and obtain static routes and be able to explain the routing table when i hit show ip route. First step to this Packet tracer is to configure the table for R3 and add an ip route that is 192.168.3.0; this allows a connection for the subnet to R1. When i command show ip routes it gave me this static route 192.168.1.0/24 [1/0] via 192.168.3.1. When i pinged the router to the address 192.168.1.10 it was not successful because there was no route between R3 and R1. After examining the problem i added the route 192.168.3.0 to R1 so that way i can bridge a connection to R3; after completing what i was suppose to do when i hit show ip route i saw my route was successful. To test out the network i pinged the signal to the R1 subnet and the ping was successful; it had an 80% success rate while making a round trip. Therefore, what i have learned was that static routing in the table allows you to connect and configure the whole network for a complete connection.