Lab #5

For lab #5 you have to configure the routers interface, if you do not then you network cannot reach the eagle server (My Situation). To configure the routers you have to first setup the R2-Central router, which is the first router connected with the switch. You have to install an operating system for the Host PC and you need to install the terminal command prompt. After you install the operating system you go to the command prompt, and you type in the command INTERFACE, FastEthernet0/0 which then you add in the ip address given and turn the port on. My failure was the access the command prompt (A simple mistake which i hope i won't make in the future). My biggest failure of the lab which i now understand was to correctly read the instructions that are given to me CAREFULLY.